I always had top loaders. But when we needed a new one 8 years ago, we opted for a front loader. It holds far more than a top loader, cleans really, really well, uses far less water and electricity. I can load a CaliKing comforter in there w/out any problem. Plus, it's far more gentle on clothes - especially delicates.

Speed Queen is the BIFL washer, plus no lid lock! That alone is enough to make me want one, my lid lock bypass with a magnet is finicky.

Speed Queen all the way. It’s going to cost you like $1500, but worth every penny.

With two kids in sports and a dog, I’d go with a Whirlpool or Maytag with a removable agitator. Big enough for bedding, tough enough for dirty jerseys, and you won’t be replacing it in a couple of years

No they suck… at least the one at my house did when I bought it. It leave clothes soaking wet, leak out of the seal, and the doors hit the dryer door.

I much prefer top loaders

My and others experience with front loaders is that due to the force vectors the bearings fail and it's usually more to have it fixed than the washer is worth.

That's how mine failed and it's how my neighbors failed a few weeks ago.

You rely on a huge gasket to keep the water where it's supposed to be instead of a small seal around the drive shaft.

You have to leave them open to dry out and not get mold issues, which means that you have a door flapping around your laundry space whereas a top loader the door is out of the way when open.

Speed Queen isn’t “large capacity” per se, but it’s your best top loader.

I think this model from LG is a solid choice. It's got a great capacity and reliable performance.

Late to the game here but I too am looking for a new Washer. I had an LG Inverter Direct Drive Truebalance WT1501CW. Honestly,? It WAS a great Washer. Never a problem until it did. Mechanically? Worked great! Problem is, the last 3 months, clothes were coming out with dirt & scum type residue. I took a few things apart looking for filters, cleaned the hose & ran multiple cleaning cycles. Nothing obvious. Thought it was all in my wife's head but she doesn't really complain much so I had to look. Then my son started taking it apart, & didn't stop until he got the drum out. Well low and behold, the spinner that the SS tub is on was full of corrosion & scum. No sense putting it back together because it will continue to throw sludge/dirt forever. Not going to run a clean cycle every week. This component should have been stainless steel. You will always have this problem, once it starts to happen. I think this should be a crime. Anyway, I don't know if it's possible but I will try to find out if this part is made of stainless steel before I purchase the next one. I'd upload a pic (very graphic) but I don't see a way.

In 2018.. I bought two speed queens. Washer and dryer. They were both junk. The washer...did not get anything cleaned. And the dryers gas burner went dead after a week. I swapped them out for lg front loaders. Ive heard the speed queens from that year (2017/2018) were absolutely lemons. I also heard the newer models today are better..but i cant confirm it. The models I had and hated were.. TR7000WN and DR7000WG

I bookmarked this one when I was shopping. Plenty of big capacity top loading recs, with lots of folks leaning toward Speed Queen and LG.

I can't speak for all their models, but my Frigidaire top loader has been great! Washes big loads for my family of 4 with no issues and it's pretty energy efficient.

We recently got the Frigidaire high efficiency top loader and it has been great.

I just replaced my old dying washing machine with the BLACK+DECKER for my family of 5.

It has worked great so far, fitting plenty of clothes in each load and getting them very clean.

The portability also comes in handy for washing things like kids' stuffed animals and pet beds around the house.

Watch this video.

Be careful of high capacity and look more at load weight. Most modern washers are only half fill, so you 4.2cuft is actually closer to 2cuft.

We have had Speed Queen front load units for over 10 years, and it's rated at 3.2cuft, but we had a family of 5 (3 adults, 2 teenagers), now only 2 adults. They have never had a problem in keeping up with laundry, even when cleaning Queen size bedding.

If you go Speed Queen, watch this on their top load units. The 1st video explains all US available brands. The 2nd is on the 2 Speed Queen top loads, and the 3rd is on why the Speed Queen suspension is different from all the rest.

https://youtu.be/jmtLeB4ZplU?si=JaJZin6s8JgDyctj

https://youtu.be/9mxottr_ZAQ?si=X3CDsmKkItDt4OI_

https://youtu.be/vA0ZTUlVuYI?si=aEJvKP-I9owP0Erf

Here is consumer report for top load washers Its a pdf. https://www.google.com/url?sa=t&source=web&rct=j&opi=89978449&url=https://reprints.theygsgroup.com/cr/reprints/LG_WashingMachines_Ratings.pdf&ved=2ahUKEwiosrechJ6BAxUmgf0HHYuFB-QQFnoECCMQAQ&usg=AOvVaw1EWt9GzK7bhzGDNd7bfzM_

For a top load I reccomend speed squeen (Huebsch in Canada) They got lower rating because they are not water eficient. But they got 5/5 for reliability. https://ca.huebsch.com/products/all-products/#top-load-washers (TR7 have 7 years warranty TR5 and TC5 have five years warranty)

If you dont want to spend so much on Speed Queen Then LG is also solid option.

Here is more info about LG top load washers https://m.youtube.com/watch?v=IF43bsh9dJc&t=54s

They use less water on purpose because they are water efficient washers. If more water will be needed LG top load washers have deep fill program which fill drum with more water.some people use also bedding program if they need even more water

I found them in a bussiness section. These are light comercial https://huebsch.com/canada/product-type/commercial/

SQ front load are not that reliable like top loads Here is consumer report for front load washers Its pdf. https://www.google.com/url?sa=t&source=web&rct=j&opi=89978449&url=https://reprints.theygsgroup.com/cr/reprints/LG_FrontLoad_Ratings.pdf&ved=2ahUKEwjZ8sDw36WBAxWRiv0HHQrfCYMQFnoECC4QAQ&usg=AOvVaw0erTL0lPByXdLS_7z6SW3_

You can see there one SQ front load model. It got 3/5 for reliability

Check this video of LG with an agitator. It's doing poor job. There is no turn over of clothes. It almost look like agitator is there just to take more space https://m.youtube.com/watch?v=gMCEHEBOIjg&pp=ygUIV1Q3NDA1Q1Y%3D

Model without agitator use difrent cleaning method watch again this video at 1:12minute https://m.youtube.com/watch?v=IF43bsh9dJc

Yes,

Here is the consumer report for the front load washers. Its pdf. https://www.google.com/url?sa=t&source=web&rct=j&opi=89978449&url=https://reprints.theygsgroup.com/cr/reprints/LG_FrontLoad_Ratings.pdf&ved=2ahUKEwjZ8sDw36WBAxWRiv0HHQrfCYMQFnoECC4QAQ&usg=AOvVaw0erTL0lPByXdLS_7z6SW3_

Appliance salesperson who's store does service here. Top load LG is the winner, all the techs at the store own them and Consumer Reports also recommends them. I can't reach the bottom of the top loaders so I have an LG front loader. The maytag , amana, whirlpools are annoying with their sensing and don't wash as well. 

I had a Speed Queen and it washed well; I did not release the softener properly, so I always had to do a second rinse. They also have an annoying lock feature while in wash mode.

Speed queen. Hands down

Go for one that lets you adjust the water level. The self sensing never add enough. Our repair guy told us the computer chips will run out in 8-10 years regardless of which brand you pick, even if the mechanics are good, so no need to go expensive.

Team Speed Queen here, highly recommend

You're going to get a lot of answers for Speed Queen. I am going to be one of them. There are essentially two types of Speed Queen top load machines.

There is the TC5003 which is a more traditional machine with a "classic" wash style (as SQ calls it) where the agitator moves separately from the basket. It can be a little bit aggressive, so if you don't have very dirty clothes you may want to go with the other style. This machine (and it's matching dryer) comes with a 5 year manufacturers warranty.

The TR series comes in three flavors. The TR3, TR5, and TR7. These machines all use a gentler style of washing where the "agitator" in attached directly to the basket and just moves along with it. There's less agitation, so it is much more gentle on clothing, but this is at the expense of washing performance. As you move up the models from 3 to 5 to 7, you get more programming options for the washing cycles and longer term manufacturers parts and labor warranties starting at 3 years, then 5 years, then 7 years respectively. Mechanically these three machines are nearly identical, so really what you get as you increase in price and model is more features/controls and longer warranty coverage.

Speed Queen machines are great, but they do have their drawbacks. I have the TC5003 and it's matching dryer and love them, but they are a bit loud. They also have a somewhat limited capacity where a queen size comforter is the absolute maximum that you can fit in the washer.

In general, I tend to suggest folks go with either the TC5 or TR5 depending in your wash performance needs. If you tend to have dirtier clothing from your occupation or hobbies, then the TC5 is great. If you work an office job or have more delicate clothing items, then the TR5 is probably the one for you.

If Speed Queen machines are too expensive or not large enough, then I would recommend basically any GE washing machine that fits your budget.

I just had to order a new washing machine yesterday because it was going to cost me $600 to fix the shock absorber rods in my Maytag (including labor). If I had the money I would have ordered a Speed Queen but I’m not rich. I ordered an LG wt6105cm it’s gotten good reviews.

I’m not sure but wanted to share my experience with GE - don’t get it! It’s been a year long battle, they’ve replaced my washing machine 4 times and all of them have the same issue - it’s sucks up clothes and no way to get them out without ripping. And the best part is they said they don’t do refunds! Any company that can’t stand behind their products is trash. Everyone shits on Samsung, but my parents had one and I had 0 issues using it, it’s still going 13 years strong.

Not going to be a popular opinion, but we just got an LG top load 8600, but it doesn’t have an agitator. So far so good for about a month. Like it better than the front load we replaced. Fits a lot of clothes.

This sub adores Speed Queen. Yale Appliance has a really helpful article about the current models. They have a wealth of information and studies. We went for the TR5 washer and DR5 washer. The rotary knobs still use a control board but I personally prefer them over digital buttons. We purchased through our local appliance store and they can service them if needed. I was also sold on their simplicity and efficiency. Time will tell how we like them but I feel good about our purchase.

LG for sure, do not buy Speed Queen, not made like they're used to.

Ours rusted out after 10 years, entire lid and housing at top. Others have complained about rust as well online, stained our clothes.

Also avoid Whirlpool, Maytag and GE, lots of issues.

My last house had a small space for the washer and dryer in the ivory-colored kitchen with stainless appliances. Everything was too big or ugly. I jokingly said to the lady at Home Depot "I wish I could find the almond-colored appliances my mom had in the 90s." They have them available on order. I got Speed Queen which also comes in white. Old fashioned top load washer with no bells or whistles to fail and a sturdy dryer. I don't remember the exact price but the were not expensive.

Edit to suggest that you buy a good quality grabber and keep it in your laundry to help get clothes out of the washer or dryer.

Do not buy a Samsung. The design allows water to sit in the tub under the drum which promotes mold and any goop from oversoaping to build up until you have brown gunk flinging into the wash tub. Pulled the drum 2 years ago and deep cleaned everything and have been very careful to avoid oversoaping now, and it's already throwing brown gunk again.

1. We have a search engine.
2. We don't know sizing.
3. Washer, thank is the poorest way to phrase a question online.

The only BIFL top loader is the Speed Queen TC5 ($1350). It has an old school agitator that can handle the dirtiest and most stained clothes.

If you don't have filthy and stained clothes (you work in an office), you can buy the Speed Queen TR series that don't have agitators.

Old school Whirlpool washer with direct drive transmission from the 90's. Or a used Speed Queen if you can find one. All the other options share the same engineering flaw -- suspension rods.

https://youtu.be/vA0ZTUlVuYI?si=zbky4TRFjRIFpOP3

I go to the Restore nearby and see what they have. If it's mechanical, not electronic, it comes home with me. I have a killer Bosch dryer that I got for $75, works better than anything I've ever had before.

Check used first.

All appliances built now are literally designed to break down and they do try to make it difficult to diagnose and fix.

When I buy appliances literally the only thing I look at is how basic is this machine and can it be taken apart easily

Buy the cheapest, as little controls as possible.

All new top loading washers are junk except the Speed Queen TC5003 washer. Try to find a used top loading Speed Queen washer that's NOT the TR series on Facebook marketplace, craigslist, or used appliance shop.

The Maytag Commercial washer is junk, don't buy it.

You need to find a older Kenmore or Maytag in good condition. The new top loaders are crap and speed queen has changed as of about 7 years ago. Did you know the epa made it illegal to produce machines with timers? Because they are not high efficiency. Ok they have the right idea in mind but the appliance corporations are just making things that fail faster and on purpose. There is a far greater cost in the production and sales of junk. Stop sending your money over seas. Buy from a local repair tech, get a old machine that has been rebuilt.

What would be the recommendation for large loads like blankets and quilts?

Speed queen

Tc5003wn hands down the best in the market currently

Either a tc5 or tc7 i own a tc7 must be purchased at a furniture store not carries by the big box stores . Made in USA

Here is a consumer report for top load washers its a pdf https://reprints.theygsgroup.com/cr/reprints/LG_WashingMachines_Ratings.pdf

LG is a water eficient model they use less water on purpose. In case you need more water, you can use a deep fill button. If you need even more water, bedding setting is better.

It does have a detergent dispenser and prewash+ option https://m.youtube.com/watch?v=SDqB4yH3muo&pp=ygUQbGcgdG9wIGxvYWQgc29haw%3D%3D

LG offers two versions with an agitator and an impeller

The Agitator version https://m.youtube.com/watch?v=gMCEHEBOIjg&t=312s&pp=ygUcbGcgdG9wIGxvYWQgYWdpdGF0b3Igd2FzaGVyIA%3D%3D

Impeller cleans better https://m.youtube.com/watch?v=IF43bsh9dJc

Look at Costco they offer free two year warranty,free delivery,haul away, and 90 days to return your apliance

Sounds like you have a speed queen TR, one of the most controversial machines ever made. While I still greatly appreciate the TC5 I can see why owning a TR would be a huge turn off.

Speed Queen alienated the vast majority of their fans with the TR, but somehow managed to win them back with the TC despite their questionable handling of the whole situation.

I would consider LG's top load offerings, specifically the impeller models. They do a pretty good job and I've gotten very few complaints on them.

All impeller models got 5/5. Stay away from basic model 7150cw because drum is not fully stainless steel.

https://m.youtube.com/watch?v=KiAjkCndFVo&pp=ygUKbGcgNzE1MCBjdw%3D%3D

Other models are fully ss.

You’re not wrong OP, and it’s really not fixable. Here’s why:

https://www.nytimes.com/wirecutter/blog/speed-queen-washer/

And:

https://www.nytimes.com/wirecutter/reviews/speed-queen-review/