Get a 16GB flash drive and google Windows 10/11 Media Creation tool - it will create the flash drive for you then just hit most likely F12 when you first turn it on to boot to the flash drive for a clean wipe of the OS - watch a YouTube video should help

Its probably locked down if it was a company asset.

The Laptop mighthave BIOS level restrictions.

Maybe not, but are normally locked up to prevent tampering.

Try image it through BIOS with a bootable USB etched with a windows 11 ISO

Bleachbit that hard drive. Or bitlocker it, then wipe the volume.

Honestly, either of those options is fine. You could also just grab a USB and make a bootable W11 drive and wipe it the old fashioned way as well. The benefit to using the Dell OS recovery is it will come with all the drivers. I know with my M18R2 I don't get WiFi or Ethernet on a clean install using Microsoft's image, I have to connect my phone via USB to get past Microsoft's BS login garbage.

If you do use the Windows settings make sure you check the one that wipes all your data. I believe that one will also retain the needed drivers to allow Windows to find all the devices as well, but it's been awhile since I have use that option. I almost always use a bootable USB.

PM

chat sent

PMing

PM on the way

PM wouldn't work, chat request sent.

Google photos wouldn't have backed up the downloads folder by default. 

If they're not there, then they're not there. There won't be anything you can do about it since you've factory reset the phone 

This is why verifying backups is so important

Did you tell Google Photos to backup that folder? It doesn't by default.

If you didn't have those specific folders set to be backed up on the phone, then they're likely not backed up. I can't check right now as I'm currently on an iphone but if I recall only pictures taken by the device are backed up by default unless you specifically set extra folders to be backed up. To verify, you can go to photos.google.com on a desktop/laptop and if they don't show up there, then they are likely not backed up.

>How to retrieve downloads after factory reset.

You don't. A factory reset wipes the encryption keys

Please check on the Community Guide if your question doesn't already have an answer. Make sure to join our Discord server, the German Discord Server, or the German Forum for the latest information, the fastest help, and more!

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

Please press and hold the RESET pinhole on the back of the NAS for 5 seconds until you hear a single beep. This will reset the network settings. Afterward, try logging in using the username "admin" with no password. This will direct you to a one-time password reset interface. Here is the article for your reference: https://support.ugnas.com/knowledgecenter/#/detail/eyJpZCI6ODgxLCJ0eXBlIjoidGFnMDAyIiwibGFuZ3VhZ2UiOiJlbi1VUyIsImNsaWVudFR5cGUiOiJQQyIsImFydGljbGVJbmZvSWQiOjI5NCwiYXJ0aWNsZVZlcnNpb24iOiIiLCJwYXRoQ29kZSI6IiJ9 Important Notes:A 5-second press only resets the network and administrator password. A 13-second press performs a factory reset, which will remove all installed applications and their configurations. Only the data in your storage pool will be preserved.

I mean... the factory setting got us to this point. Really need an entirely new OS that's not spaghetti code on top of spaghetti code trying to cobble 50 discreet systems (comprised of their own spaghetti code) together.

Also the original coders and many subsequent coders that have added to this have many lines of malicious code mixed in as well. Too many backdoors and bloatware.

You are opperating under the blissful ignorance of the fact that the old semi functional government you believe was fully functional isn’t the same government that got us here.

We are here because the government functioned the way it did. It promotes the wrong people/class to power, and there’s no systems built in to stop it.

No amount of rewinding or fixing the old system will ever change that fact. Our government is fundamentally flawed.

We allow ourselves to ignore the fact that we are described as a “flawed democracy” because it lets us sleep better at night. We read the democracy part and sorta just gloss over the flawed part as if that wasn’t the more important word of the two.

Our government even when it seemed to be working ~ a decade or two ago, did not work. It never really has. It just got kinda close. But deep down it’s always done the exact same thing. Represent the rich, and do whatever it can for the poor after that.

But now it’s been ~250 years and after centuries of the rich getting richer and the poor getting poorer, we are starting to really feel the flaws. They were always there, they were just easier to ignore.

We can’t go back to what once was. It didn’t work. It got us here. We need to go forward to what we know must replace it.

everyone, this is important.

We ask a lot of questions about how to do this, why we can’t do that?

It’s all the same answer, has been forever.

Elect a majority who REJECT corporate pac money

It is the only way. Those who accept pac money are compromised and will never be willing to go against their donors in favor of the people.they don’t want anything to be passed if it doesn’t benefit them, and they don’t want to give up any power, and they will spend as much as they need to on their bought and paid for reps to make it happen. We MUST have a majority who does not have this conflict.

Flush, them, out. Do it this time. Do not re-elect your senator and house rep, if they accept corporate pac money. There will be a candidate who is running without that conflict, elect them instead. Doesn’t matter who you recognize from tv, if they accept corporate pac money, they HAVE to be removed.

It isn’t the government that’s the problem. The government is the victim of the problem. The problem is that unrestrained capitalism has bought all of the controls that used to protect us from unrestrained capitalism. Now all media tells the exact same story. All regulators are owned by the regulated. And government protects the rich, and only the rich.

Restore point 2024, do not install Trump University Malware.

11sp doesn’t have an app, it’s eTap not AXS. There was a USB dongle at one point but good luck finding one. That stuff doesn’t have firmware updates as far as I remember.

I could be incorrect but the 11 speed isn’t part of the AXS range so doesn’t work on the App.

I had an 11-speed Red and a 12-speed AXS and the former never appeared on mine.

Did you find the user manual online? Pretty detailed installation and fine tuning instructions in there.

https://www.sram.com/globalassets/document-hierarchy/user-manuals/sram-road/electronic/etap-hrd-systems-manual.pdf

The default admin logon for most (all?) Lorex NVRs (units with the 1st character = N) is ID = admin, password = 000000 or nothing.

Note that the previous owner would also need to release the unit from their account but don't do this until you are able to logon as admin on the unit. If you can't logon with the credentials above then the previous owner should follow the instructions for having the admin password reset.

See the Lorex support article at https://help.lorex.com/support/solutions/articles/72000645042-what-to-do-before-selling-or-transferring-lorex-devices-to-a-new-owneso

After you are able to logon to the NVR as admin you can reset the the entire system including any attached cameras to factory default through the NVR. Any recordings previously made while the system was operational will still be on the hard drive. You can reformat after you are able to logon although having old recordings won't hurt anything. The system overwrites the oldest recordings when the hard drive is out of space.

Yes you would have to open the unit and do a reset via the motherboard. Unplug all camera and power open the unit, plug the monitor and press the reset button and put the power back. Google and there are specific instructions. System will beep and do a factory reset. Thereafter plug all cameras back if POE to gain power and do a physical reset to each camera via its own reset button. Once you do that all cameras should reconnect to defaults settings.

However previous owner does have to delete the NVR profile from his app otherwise you will only see it local not over the internet.

Not sure if it's true but I once heard there is a factory reset button on the circuit board inside the case.

with a usb boot stick.

Windows password or BIOS password

If windows, reinstall

If BIOS, you're SOL